Connecting The Aerial Or Cable Television Network; Connecting A Decoder - Samsung Colour TV/VCR Owner's Instructions Manual

Connecting the Aerial or Cable Television Network

To view television channels correctly, a signal must be received by
the set from one of the following sources:
An outdoor aerial
A cable television network
Plug the aerial or cable network input cable into the socket at the bottom of the
television's rear panel.
If you wish to subscribe to a cable network, contact your
local dealer.

Connecting a Decoder

This COMBI VISION is fully equipped to receive scrambled Pay TV
broadcasts.
Example: Premiere broadcasts.
If you wish to connect both a decoder and an external
VCR to the SCART connector, you must plug:
The decoder into the VCR
The VCR into the COMBI VISION (refer to
"Connecting Other Video Equipment" on the
following page for further details)
1
Plug the SCART cable supplied with the decoder into the SCART
connector on the rear of the set.
2
Plug the other end into the decoder.
or
Cable
Television
Network
REAR OF THE
TELEVISION
REAR OF THE TELEVISION
SCART
Decoder
5