Setting The Sleep Timer; Viewing Pictures From External Sources - Samsung Colour TV/VCR Owner's Instructions Manual

Setting the Sleep Timer

You can select a time period of between 15 and 180 minutes after
which the television automatically switches to Standby mode.
1
Press the SLEEP button (
2
If the timer is...
Already set
Not yet set
3
Press the SLEEP button (
appropriate length of time is displayed:
Result: The television switches to Standby mode when the timer
reaches 0. During the last minute,
After setting the timer, you can display and modify the
remaining time by pressing the SLEEP button (
To switch the timer off, select 00.
Your COMBI VISION switches to Standby mode
automatically fiften minutes after the last broadcast has
finished on the selected channel.

Viewing Pictures from External Sources

You can use your television to watch pictures from an external
source, such as a:
Camcorder or VCR
Video disc player
Decoder (automatic switch over)
When you use a decoder with your COMBI VISION, the signal from
the decoder will be givin automatic priority over normal A/V signals.
1
Connect the AV cables, referring to pages 5 and 6 if necessary.
2
Switch the COMBI VISION on.
3
Start playback on the external source.
Result: The pictures from the external source appear on the screen.
If the pictures do not appear automatically, press the INPUT button
( ) to select the AV input. To return to the normal channels,
press the same button again.
To connect different types of video equipment to your
television, use the input connectors on the front and rear
panels (RCA and SCART respectively). If equipment is
plugged into both these connectors, the front connector
has priority.
) once to display the current timer setting.
A symbol is displayed, followed by...
The remaining time before the television
switches to Standby mode.
00.
) again one or more times until the
POWER OFF is displayed.
) again.
REC EJECT P/S CRYSTAL PB
INDEX MEMORY SLEEP
TRK LANG.SEL CLEAR
INPUT
21