Part 5. Programming Mode - LG WD-10467BD Owner's Manual

Part 5 PROGRAMMING MODE
❁ Programming mode
: You can check machine information or change setting on "Program setup", "Diagnostic Test".
There are two methods that you can enter programming mode.
❁ Case1. Check the programming mode by button
How to enter "Programming mode"
You can enter programming mode
only for ready step and pause step.
- Noncoin type
1) Push the MEDICAL 90 and NORMAL 60 button
at the same time.
2) Push the NORMAL 75 button 3times.
3) Push the START button.
4) 'LqC1' will show on the display.
- NONCOIN TYPE -
1 0
How to use button
You can change Washer vend price, cycle time and
Cycle parameters, etc.
Press Button
MEDICAL 90 Move to upper level or
Comes back to Idle State
NORMAL 75
Move to the mode in the
NORMAL 60
Move to the modes in the
START
Enter the selected mode
Description
same level (+)
same level (-)