Samsung HT-TZ312 Manual page 33

aUX2 : rear Panel
Audio Cable (not supplied)
If the external analog component
has only one Audio Out, connect
either left or right.
External Analog Component
aUX2 : Connecting an External analog Component
Analog signal components such as a VCR.
1. Connect AUX IN 2 (Audio) on the Home Theater to the Audio Out of the external analog component.
~ Be sure to match connector colors.
2. Press the aUX button on the remote control to select aUX 2 input.
~ You can also use the fUnCtiOn button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.in ➞ aUX 1 ➞ aUX 2 ➞ USB ➞ OSD iPOD ➞ fm.
M
`
You can connect the Video Output jack of your VCR to the TV, and connect the Audio
Output jacks of the VCR to this product.
OPtiCaL : Connecting an External Digital Component
Digital signal components such as a Cable Box/Satellite receiver (Set-Top Box).
1.
Connect the Digital Input (OPTICAL) on the Home Theater to the Digital Output of the external digital
component.
2. Press the aUX button on the remote control to select DiGitaL in.
~ You can also use the fUnCtiOn button on the main unit.
The mode switches as follows :
DVD/CD ➞ D.in ➞ aUX 1 ➞ aUX 2 ➞ USB ➞ OSD iPOD ➞ fm.
OPtiCaL : rear Panel
ipod
AUX IN 2
External Digital Component
ipod
AUX IN 2
Optical Cable
(not supplied)
1