Samsung HT-TZ312 Manual page 23

Ht-tZ312
Speaker Components
(L) (R)
REAR
(L) (R)
L (AH81-04028D)
R (AH81-04028C)
FRONT
STAND
L (AH81-04028B)
(AH81-04028E)
R (AH81-04028A)
How to install the Speaker on the Stand
1. Turn the StanD upside-down and connect
it to the StanD BaSE.
2. Insert three small SCrEWS into three holes
marked with arrows using a screwdriver as
shown in the illustration.
. Insert a large SCrEW into the hole on the
rear of the Speaker StanD.
. Connect the assembled stand to the
SPEaKEr.
5. Insert another large SCrEW into the hole
on the rear of the speaker using a
screwdriver as shown in the illustration.
. This is the successfully assembled speaker.
Make sure that the speaker is installed on a
fl at and stable area. Otherwise it may be
easily knocked over.
How to install the Speaker on the Stand Base
1. Connect the SPEaKEr with the
StanD BaSE.
2. Insert the SCrEW into the hole on the rear
of the speaker using a screwdriver as shown
in the illustration.
.
This is the SPEaKEr successfully
assembled with the Stand Base.
CENTER CENTER
(AH81-03853A) (AH81-03469A)
FRONT/REAR FRONT/REAR
(AH81-03852A) (AH81-03465A)
HOLE COVER CRADLE STAND/
WALL MOUNT
1

5
1

SCREW (Small): 6EA
CENTER (AH81-03944A)
(AH81-03856E)
SCREW (Large): 4EA
(AH81-03943A)
SUBWOOFER STAND BASE
(AH81-03856F) (AH81-04028F)
2
STAND
BASE
STAND


2
SPEAKER
STAND
BASE
SPEAKER
STAND
21