Timer Function
•
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
POWER.
4
Set the timer
switch-on time.
a. Set the hour by pressing
button.
b. Press ENTER .
•
The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
•
TIME OFF is displayed for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
Press or button
7
to select the source to
be played when the
system switches on.
•
TUNER (radio) :
a Press ENTER.
b Select a preset station by pressing
or
.
•
DVD/CD (compact disc) :
Load on or more compact disc.
•
USB :Insert a USB.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
Note
•
If there is no disc or usb, when you select the "DVD, USB, it will automatically change to
"TUNER".
Press TIMER/
2
CLOCK until
TIMER is
displayed.
5
Set the timer
switch-off time.
or
a. Set the hour by pressing
button.
b. Press ENTER.
•
The minutes flash.
or
c. Set the minutes by pressing
button.
d. Press ENTER.
•
VOL 10 is displayed, where 10
corresponds to the volume
already set.
8
Press ENTER to
confirm the timer.
3
Press the ENTER
button.
•
TIME ON is displayed for a few
seconds, followed by any switch-
on time already set; you can set
the timer switch-on time.
Press
6
to adjust the volume
level and press
ENTER.
•
or
The source to be selected is
displayed.
or
ENG
or
button
54