Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung AH68-01018B Instruction Manual

Micro component audio system
Table of Contents

Advertisement

Searching for and Storing the Radio
Stations
GB
You can store up to:
15 FM stations
15 AM stations
15 FM stations
8 MW stations
7 LW stations
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing TUNER (Band)
again on the front panel or Band on the remote control.
Result: The appropriate indication is displayed:
FM
AM(MW)
LW(OPTION)
SW1, SW2(OPTION)
3
To search for a
station...
Manually
Automatically
PRESET function is explained in detail in the section
" Selecting a Stored Station " on.
4
Select the station to be stored by:
or
Pressing
or
frequency respectively.
To scroll through the frequencies faster when
searching manually, hold down the
The automatic search procedure may stop on a
frequency that does not correspond to a radio station.
If this happens, use the manual search mode.
5
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press Program/Set.
Result: The PRGM is displayed for a few seconds.
b Press
or
c Press Program/Set to store the radio station.
Result: PROGRAM is no longer displayed and the station is
stored.
6
To store any other radio frequencies required, repeat Steps 3 to 5.
The PROGRAM function can be used to assign a new station
to an existing program number.
Demo
REC/Pause
2
On/Standby
CD Synchro
AUX
4
CD Repeat
1
Phones
5
Program/
Set
4
14
(option)
(option)
(option)
).
Frequency Modulation
Medium Wave
Long Wave
Short Wave
Press Tuning Mode
One or more times until MANUAL
is displayed.
One or more times until AUTO is
displayed.
buttons to increase or decrease the
or
to assign a program number between 1 and 15.
Power
Sound
TUNER
/Band
Surround
Mode
C D
Sleep
TAPE
4
5
5
Open/Close
Mono/ST
Tuning Mode
3
5
4
2
VOL.
Band
VOL.
4
5
3
5
Tuning
Tuning
Mode
Mode
VOL.

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing On/Standby (
2
Select the required frequency band by pressing TUNER(Band) on
the front panel.
3
Select the radio station as follows.
To listen to ...
Stored station
On/Standby
1
Phones
buttons.

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
If reception from a specific FM radio station is poor, press Mono/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
S.Bass
Level
Multi Jog
) .
Press ...
1. the Tuning Mode button until "PRE-
SET" is displayed.
2.
or
button to select the
required program.
TUNER
/Band
Demo
REC/Pause
2
C D
CD Synchro
TAPE
AUX
CD Repeat
Tuning Mode
3
Program/
Band
VOL.
Set
Tuning
Mode
VOL.
Mono/ST
Mute
S
M

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mm-b9

Table of Contents