Table of Contents
Advertisement
setup
COmmUNICATION
You can set the RS-485 communications setting in regard of the camera.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1.
2.
sysTem INfO
You can check the system information.
For selecting and saving each menu item, refer to "How to use the keyboard controller". (page 20)
1.
2.
_ setup
00000A-EU2_SCC-C7455P-ENG.indb 46
Select <MAIN MENU>-
<COMMUNICATION>.
Select each item and set appropriately.
PRIORITY : Set the priority by selecting
<HW> or <SW>.
When selected <HW>, the protocol,
baud rate and address settings will
follow those settings of the adaptor
switch.
PROTOCOL, BAUD RATE, ADDRESS :
When selected <SW>, you can manually
set the protocol, baud rate and address.
Select <MAIN MENU>-<SYSTEM INFO>.
The current system information is displayed.
COMMUNICATION
RS485
PRIORITY
PROTOCOL
SAMSUNG
BAUD RATE
ADDRESS
SYSTEM INFO
4 _ PTZ _ WDR _ P
TYPE
PROTOCOL
SAMSUNG
ADDRESS
COMM. TYPE
HW, RS485, HALF
BAUD RATE
SERIAL NO.
000000000000000
v1.00 _ 00000
CAMERA VER.
v1.00 _ 00000
ALARM VER.
HW
HALF
9600
0
0
9600
2009-08-13 오후 9:54:
Advertisement
Table of Contents
