Table of Contents
Advertisement
setup
AGC
With this, you can adjust the AGC level of a
camera.
With AGC active, if the signal strength falls
below the standard level, AGC will amplify the
video signal to automatically improve the
sensitivity.
If <SENS-UP> is set to <OFF>, or <FIX>
mode, the <MOTION> menu will switch to
<AGC>.
With the USER (
[ENTER] to display the corresponding screen.
In this mode, you can select from VERY LOW
to VERY HIGH in 16 levels, enabling deeper, wider choices to your convenience.
With the FIX (
screen. In this mode, you can select an individualized mode in 16 levels, regardless of
the brightness.
M
MOTION
You can specify a level of AGC for controlling the camera motion.
This is available only of the SENSE UP menu is set to AUTO.
Select F.FAST if you want to monitor a very fast moving object in a low contrast
scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same
condition.
DNR
Reduces the noise on the camera image.
The higher the level is, the greater the effect is.
Set it to <USER> to specify the level.
_ setup
00000A-EU2_SCC-C7455P-ENG.indb 26
) submenu selected, press
) submenu selected, press [ENTER] to display the corresponding
As long as the DAY/NIGHT menu is set to AUTO in Camera Setup, the AGC menu is
not available.
As long as FLICKERLESS is set to ON, the AGC mode is not available.
If you set BACKLIGHT to WDR, the AGC fix mode is not available.
As long as DAY/NIGHT is set to <AUTO>, the <MOTION> menu is not available.
CAMERA SET
CAMERA ID
VPS
IRIS
AGC
(VERY HIGH) ---
DNR
SHUTTER
SENS-UP
FLICKERLESS
XDR
OFF
OFF
ALC
MID
OFF
OFF
OFF
MID
2009-08-13 오후 9:54:
Advertisement
Table of Contents
