Table of Contents
Advertisement
setup
3.
_ setup
00000A-EU2_SCC-C7455P-ENG.indb 38
Select each item and set appropriately.
POSITION : Set the starting and ending
positions for the <AUTO PAN>.
Move to the setting screen and adjust
pan/tilt to the desired starting position,
and then press [ENTER].
Again, adjust pan/tilt to the desired
ending position and press [ENTER] to
finish <AUTO PAN> setup.
DIRECTION : Sets the direction of the camera's movement from the starting to
the end position. (Based on panning)
<RIGHT>
START
ENDLESS : Instead of shuttling between start and end positions, the camera
turns 360° endlessly while stops for the <DWELL TIME> at both positions.
SPEED : Sets the moving speed of the camera, from 1 to 64.
DWELL TIME : Sets the dwell time at the starting and ending positions, from
1 to 60 seconds.
POSITION
DIRECTION
ENDLESS
SPEED
DWELL TIME
<LEFT>
START
END
AUTO PAN 1
LEFT
OFF
[10]
3SEC
END
2009-08-13 오후 9:54:
Advertisement
Table of Contents
