•
Make sure all controls (levers and pedals) are in the
NEUTRAL position before starting the carrier.
•
While operating the breaker and carrier, keep hands
and feet on the controls at all times.
•
Before leaving the carrier, always lower the boom
and insure the carrier is stable. Never leave the
machine with the engine running. ALWAYS ENGAGE
THE PARKING BRAKE.
•
Stop
the
engine
adjustments or servicing to either the carrier or the
breaker.
•
Do not operate the tool at oil temperatures above
190 °F/88 °C. Operation at higher temperatures
can damage the internal components of the breaker
and carrier and will result in reduced breaker
performance.
•
Do not operate a damaged, leaking, improperly
adjusted or incompletely assembled breaker.
•
Do not modify the breaker in any manner.
•
Use only tool bits supplied by STANLEY. Use of tool
bits supplied by another manufacturer may damage
the breaker and will void the warranty.
•
To avoid personal injury or equipment damage, all
breaker repair, maintenance and service must only
be performed by authorized and properly trained
personnel.
•
If you do not understand how to safely operate your
breaker, contact an authorized STANLEY Dealer for
assistance.
•
Keep this manual with the breaker.
•
Do not operate this equipment if you are taking
medication which may affect your mental judgement
or physical performance.
•
Do not operate this equipment if you are under the
influence of drugs or alcohol.
SAFETY PRECAUTIONS
before
attempting
repairs,
MBF5 User Manual ◄ 7