Stanley MBF5 User Manual page 18

OPERATION
DO NOT USE UNDERWATER
Do not use underwater without supplying air to breaker.
No part of the breaker may be submerged in water.
Underwater usage of the breaker will cause
internal damage to the breaker. Consult STANLEY
for modifications and specific warranty coverage if
you have an underwater requirement.
GREASE THE BIT
Grease should be applied to the upper end of the
breaker tool bit each time it is installed. Thereafter, the
tool should be greased at the fitting to reduce wear in
the lower body and bushings of the tool. See "Tool Bit
Lubrication" on page 13.
18 ► MBF5 User Manual