IF THERE IS CLEARANCE BETWEEN FRIDGE DOOR
AND FREEZER DOOR, PLEASE FOLLOW THE STEPS.
First : Please level up the refrigerator.
(The differance can cause, if the floor where installed is uneven)
Freezer door is lower than that of
refrigerator
Freezer door is higher than that
of refrigerator
Not to adjust the clearance by using control lever, Please refer to the next page.
1) Insert a straight driver (-) ( ) into hole
of the control lever ( ), rotates it clock-
wisely and level up the balance.
DRIVER(-)
CONTROL LEVER
1) Insert a straight driver (-) ( ) into hole
of the control lever ( ), rotates it
clockwisely and level up the balance.
9
DRIVER(-)
CONTROL LEVER