Getting Ready To Install The Refrigerator - Samsung RSG5 User Manual

setting up your side-by-side
refrigerator

gEtting rEaDy to instaLL thE rEfrigErator

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the
many state-of-the-art features and efficiencies that this new appliance has to offer.
Selecting the best location for the refrigerator
• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Refer to drawing and dimensions below for overall space required for use.
9.5mm
When moving your refrigerator
To prevent floor damage be sure the front
levelling legs are in the up position (above the
floor). Refer to 'Levelling the refrigerator' in the
manual(at page 14).
To protect the finish of the flooring, place the
protection sheet such as packing carton under
the refrigerator.
When installing, servicing or cleaning
behind the refrigerator, be sure to pull
CAUTION
the unit straight out and push back in
straight after finishing.
23mm
at least
6mm
160º 160º
1758mm
Leg
at least
6mm
screw Driver
setting up _