Samsung RS26WUNS Owner's Manual And Installation page 32

INSTALLATION OF THE WATER DISPENSER LINE
Select the location where the purifier is to install. (Model with the purifier)
- Cut the water line attached to the purifier
to the appropriate place after measuring
the distance between the purifier and the
cold water tap.
- If you wish to reassemble the water inlet
and outlet sides of the purifier during purifier
installation, see the reference illustration.
Remove any residual matter inside the purifier. (Model with the purifier)
- Open the main water tap to check whether water
is running through the water tube on the water
inlet side of the purifier.
- If water does not come out through the line,
check whether the tap is open.
- Leave the tap open until clean water is running
out and any residual matter that built up during
manufacturing has been removed.
Attach the purifier lock stations.
- Hold the purifier lock stations in the appropriate position
(under the sink for example) and fix it tightly into place
where to screw.
LINE OUTLET
SIDE OF
PURIFIER
PURIFIER
WATER
COUPLER
WATER INLET
SIDE OF PURIFIER
OUTLET SIDE
OF PURIFIER
WATER
TWO PURIFIER LOCK
TWO PURIFIER LOCK
32
90 degree
REFERENCE
PURIFIER
WATER LINE
STATION
STATION