Set The Initial Settings - Kenwood KDC-153R Instruction Manual

GETTING STARTED
To set the date
7
Turn the volume knob to select [DATE FORMAT], then press the knob.
8
Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press
the knob.
9
Turn the volume knob to select [DATE SET], then press the knob.
10 Turn the volume knob to make the settings, then press the knob.
Day Month Year or Month Day Year
11
Press and hold to exit.
To return to the previous setting item, press
3

Set the initial settings

1 Press B SRC repeatedly to enter STANDBY.
2
Press the volume knob to enter [FUNCTION].
• Pressing AUD enters [AUDIO CONTROL] directly.
3
Turn the volume knob to select an item (see the following table), then
press the knob.
4 Repeat step 3 until the desired item is selected or activated.
5 Press and hold to exit.
To return to the previous setting item, press
[AUDIO CONTROL]
[SWITCH PREOUT] [REAR]/[SUB-W]: Selects whether rear speakers or a subwoofer are
connected to the line out terminals on the rear (through an external
amplifier). (Page 15)
[SP SELECT]
[OFF]/5/4/6×9/6/OEM: Selects according to the speaker size (5 inches
or 4 inches, 6×9 inches or 6 inches) or OEM speakers for optimum
performance.
4
ENGLISH
[TUNER SETTING]
[PRESET TYPE]
[SYSTEM]
[KEY BEEP]
[SOURCE SELECT]
.
[P-OFF WAIT]
[CD READ]
[F/W UPDATE]
.
Default: [XX]
[CLOCK]
[CLOCK DISPLAY] [ON]: The clock time is shown on the display even when the unit is turned
[NORMAL]: Memorizes one station for each preset button in each band
(FM1/FM2/FM3/MW/LW). ; [MIX]: Memorizes one station for each preset
button, regardless of the selected band.
[ON]: Activates the keypress tone. ; [OFF]: Deactivates.
[BUILT-IN AUX] [ON]: Enables AUX in source selection. ; [OFF]: Disables. (Page 8)
Applicable only when the demonstration mode is turned off.
Sets the duration when the unit will automatically turn off (while in standby
mode) to save the battery.
[20M]: 20 minutes ; [40M]: 40 minutes ; [60M]: 60 minutes ;
[– – –]: Cancels
[1]: Automatically distinguishes between audio file disc and music CD. ;
[2]: Forces to play as a music CD. No sound can be heard if an audio file disc
is played.
[UPDATE SYSTEM]
[F/W UP xxxx] [YES]: Starts upgrading the firmware. ; [NO]: Cancels (upgrading is not
activated). For details on how to update the firmware, visit
<www.kenwood.com/cs/ce/>.
off. ; [OFF]: Cancels.