Icom IC-F5120D series Operating Manual page 11

D Displaying the received call log
If activated, the log stores received calls into the transceiver's
memory.
Up to 10 calls can be stored, and the oldest call record is
erased when an 11th call is received. However, once the trans-
ceiver is turned OFF, the log is erased.
The Individual voice call, Call alert, Status call and Message
call are stored.
q Push [Digital Button] to enter the application selection mode.
• "VOICE" appears.
• To change to the desired call type, hold down [Digital Button] for
1 second while in standby. After changing, the transceiver auto-
matically enters the application selection mode.
w Push [CH Up] or [CH Down] to select "CALL LOG."
e Push [Digital Button] again to display the call log informa-
tion.
When log information is displayed
The calling station
ID name
When there is no log information
r Push [CH Up] or [CH Down] to select the desired call.
t Hold down [PTT] to send a voice call.
• A voice call can be made with the logged station.
3
IDAS OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8