Toshiba RAV-GM301ATP-E Service Manual page 80

No. Part name
Rear cabinet 1) Perform works of items 1 of 1 and 2 , 3 .
5
2) Take off fixed screws for the bottom plate.
(ST1T Ø4 × 10L, 2 pcs.)
3) Take off fixed screw for the valve mounting
plate. (ST1T Ø4 × 10L, 2 pcs.)
Fan motor 1) Perform works of items 1 of
6
2) Take off the flange nut fixing the fan motor
and the propeller.
• Turning it clockwise, the flange nut can be
3) Remove the propeller fan.
4) Disconnect the connector for fan motor from
the inverter.
5) Take off the fixing screws (3 pcs.) holding by
hands so that the fan motor does not fall.
NOTE:
Tighten the flange nut with torque 4.9Nm
(50kgf/cm).
Procedure
loosened. (To tighten the flange nut, turn
counterclockwise.)
1 and 2 .
Flange nut
Fan
motor
– 80 –
FILE NO. SVM-18042
Remarks
Rear cabinet
Loosen the nut by turning
clockwise
Propeller fan