Schwinn AD6 Airdyne Service Manual page 30

19. Using a #2 Phillips screwdriver, remove the Fan Cage Bracket from both
sides of the machine.
20. Using a 15 mm wrench, remove the Eye Bolt Securing Nut from both
Fan Cage Bracket
sides of the machine.
Fan Tension
Adjustment Nut
21. Using a 10 mm wrench, loosen the Fan Tension Adjustment Nut and
remove it along with the Eye Bolt.
Eye Bolt
Securing Nut
Note: To assist with re-assembly, be aware that the Eye Bolt has a slight
bend and must be reassembled in the same orientation.
22. Repeat procedure on the opposite side of the machine.
23. Pulling from the front of the machine, remove the Fan Assembly from
the Frame Assembly.
30