Table of Contents
Advertisement
MULTI-POINT FUNCTION
Connecting with two Bluetooth enabled devices simultaneously.
Enable the multi-point function
1. Pair the headset to the 1st device (Please refer to "pairing" section).
2. Press and hold the TALK button for about 8 seconds to enter into paring mode, then pair
it to the 2nd device (Please refer to "pairing" section).
3. Press once the TALK button again. The 2 devices will be connected simultaneously.
Answer a call while talking on the other paired phone
- To answer the second call and put the current call on hold, double press the TALK button.
- To answer the second call and terminate current call, press once on the TALK button.
- To reject the second call, reject from mobile phone directly.
MUTING THE MICROPHONE
To mute the microphone during an active call
During an active call, press and hold the VOL button for approximately 2 seconds. A
periodic tone can be heard in the speaker.
To end the mute function
When the microphone is muted, press and hold the VOL button for approximately 2
seconds until the periodic tone is end.
BLUETREK CARBON SMART I 7
Advertisement
Table of Contents
