ZTE G650/G651/G420/G120 GoTa Digital Trunking Phone User Manual
5.2 Call Attribute
After Call Attribute is set, the PTT call made in the phone will be Ordinary
PTT call or Pre-emptive Priority PTT call, and the corresponding icon will
display in the status bar of the standby screen.
Setting Method
1. Press PTT Functions to select Call Attribute ;
2. Press
/
3. Press Select twice.
Note
5.3 No-Disturbing
After "No-Disturbing" is activated, you will not receive any PTT call. You
could perform the corresponding settings and query in the phone.
Setting Method
1. Press PTT Functions to select Supplement Svc , and then select
No-Disturbing ;
2. Enter the phone password and press
Cancel or Query ;
3. Press Select .
46
key to select Normal or Pre-empty ;
Please refer to section 11.1.8 "Quickly Change
Call Attribute in Idle Mode" for details on call
attribute setting shortcut.
▲
▼
/
key to select Setting ,