Table of Contents
Advertisement
3.1 Making a Call
In standby mode, signal strength icon is displayed on upper left
corner of screen. And then, you can make or answer calls.
1. Power-on the phone.
2. To make a call, you should at first pick up the phone receiver
or press HANDFREE key.
3. Make a call afterwards as steps stated in the following.
Note: when SIGNAL indicator turns off and there is no dial tone
while picking up the phone receiver, maybe RF signal is weak or
antenna is not screwed on and fixed well, please change the position
of the terminal or check the antenna installation.
3.1.1 Making a Domestic Call
Enter the telephone number (add area code when making a long
distance call if necessary). Press CALL/REDIAL key to send a call.
3.1.2 Making an International Call
Enter the country code and the complete telephone number you
want to dial, press CALL/REDIAL key to send. Delete "0" before the
area code.
3 Basic Operations
20
Advertisement
Table of Contents
