Selecting A Signal Source (Antenna Or Cable) For Pip; Selecting A Signal Source (External A/V) For Pip - Samsung PCL 5415R Owner's Instructions Manual

S F
P E C I A L E AT U R E S

Selecting a Signal Source (Antenna or Cable) for PIP

1
Press the Menu button.
Move the joystick down to
select "PIP", then press
the joystick to enter.
2
Move the joystick down to
select "ANT/CATV."
If an antenna is connected,
the setting is "ANT."
If a Cable TV system is pro-
viding the signal, move the
joystick to the left or right
until the appropriate type of
cable system is is displayed
("STD," "HRC," or "IRC").
Press the Menu button to exit.

Selecting a Signal Source (External A/V) for PIP

1
Press the Menu button.
Move the joystick down to
select "PIP", then press the
joystick to enter.
2
Move the joystick down to
select "TV/Video," then
move the joystick to the
left or right to cycle
through all of the available
signal sources:
"TV," "Video 1," "Video 2,"
"Video 3," "S-Video 1,"
"S-Video 2," and
"Component1(480i)."
Press the Menu button to
exit.
Quick way to access the signal
source (PIP): Simply press the
"Source" button on the remote
control.
For more information about
external A/V components and sig-
nals, see "Selecting a Signal Source
(External A/V)" on page 3.21.
If you select "TV", the PIP image is
the same as the main image.
Models PCL5415R/PCL6215R do
not support Component1,
Component2 on the PIP subscreen.
C F : S F
HAPTER OUR PECIAL EATURES
4.12