Selecting A Signal Source (Antenna Or Cable) For Pip; Selecting A Signal Source (External A/V) For Pip - Samsung ST-43T7P Owner's Instructions Manual

S F
P E C I A L E AT U R E S

Selecting a Signal Source (Antenna or Cable) for PIP

1
Press the Menu button.
Press the CH button to
select "PIP", then press
the VOL + button.
2
Press the CH button to
select "ANT/CATV."
If an antenna is connected,
the setting is "ANT."
If a Cable TV system is pro-
viding the signal, press the
VOL + or VOL - button until
the appropriate type of
cable system is is displayed
("STD," "HRC," or "IRC").
Press the Menu button to exit.

Selecting a Signal Source (External A/V) for PIP

1
Press the Menu button.
Press the CH button to
select "PIP", then press the
VOL + button.
2
Press the CH button to
select "SOURCE", then
press the VOL + or VOL -
button to cycle through all
of the available signal
sources:
"TV", "Video 1", "Video 2",
"Video 3", "S-Video 1",
and "S-Video 2".
Press the Menu button to
exit.
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
PIP
PIP : On
SOURCE : TV
Size : Large
Swap
ANT/CATV : ANT
Channel : ANT 4
Quick way to access the signal
source (PIP): Simply press the
"Source" button on the remote
control.
If you select "TV", the PIP image is
the same as the main image.
53