Bissell 2164A SERIES User Manual page 5

Spot Cleaning Carpet & Upholstery
WARNING
Keep spray away from face. Failure to do so may result in personal injury.
NOTE: If unit stops spraying, push power button to turn unit OFF and check
cleaning solution level. Refill if needed. Never run dry.
NOTE: When cleaning on upholstery, be sure to use the unit vertically upward.
1
Push power button to turn the unit ON.
Battery status lights will illuminate to
show how much battery remains.
3
For stubborn spots, use brush to gently
scrub soiled area while continuing to
spray cleaning solution.
5
Repeat steps 2 and 4 until no more dirt or cleaning solution can be removed.
8
www.BISSELL.com
2
Hold the unit above soiled surface
and press the trigger to spray
cleaning solution.
4
PRESS
TILT
PULL
For maximum suction performance,
tilt unit upward and press nozzle
down firmly on cleaning surface.
Do not overwet.
Window Cleaning
2
1
Remove Scrubbing Brush Attach Window Cleaning
by pushing tab up and Tool by first securing on
pulling gently. the clear Nozzle.
4
Rinse Clean Water Tank to remove
any previous contents. Fill with
window cleaner (not included).
4
Spray window
cleaning
solution
directly on the
window.
6
Spray Trigger still released, tilt cleaner
down to engage the squeegee. Clean
with complete vertical strokes and work
across entire window.
NOTE: This machine is safe to use with any off-the-shelf ammonia-based
window cleaning solutions. Do not attempt to use any other types of cleaning
fluids, such as lemon-based, pine-based, or solvent based cleaning fluids, as it
may damage your machine and void your guarantee.
(select models)
3
Then rotate Window
Cleaning Tool until it
clicks into place.
Hold machine in
5
vertical position in
front of window and
press Spray Trigger to
spray window cleaning
solution onto window.
Release Spray Trigger
and use sponge on the
tool to gently scrub.
Go to step 6.
5
Release Spray Trigger.
Use the sponge on the
tool to gently scrub.
7
When cleaning, ensure squeegee is
against window for optimal suction and
hold machine in upright position.
www.BISSELL.com
9