Viewing An External Signal Source - Samsung HL-S5087W Owner's Instructions Manual

Viewing an External Signal Source

Use the remote control to switch between viewing signals from connected equipment,
such as a VCR, DVD, Set-Top Box or the TV source (broadcast or cable).
Setting the Signal Source
1
Press the MENU button.
Press the ENTER button to select
"Input".
2
Press the ... or † button to select
"Source List", then press the ENTER
button.
Press the ... or † button to select a
signal source, then press the ENTER
button.
• When you connect equipment to
the TV, you can choose between
the following sets of jacks:
"AV1", "AV2", "S-VIDEO1",
"S-VIDEO2", "COMPONENT1", "COMPONENT2", "PC",
"HDMI1", or "HDMI2" on the TV's rear panel and "AV3" on
the TV's side panel.
Alternate method
Press the SOURCE button on the
remote control repeatedly to
select an external signal source.
NOTES
• Only connected devices can be selected.
• Before selecting an input source, make sure the corresponding
external device is connected first.
• HDMI input can be selected only when the external device is
turned on and connected to the TV.
Input
Return
Source List TV
Edit Name
Input
Source List
Return
TV
----
AV1
----
AV2
----
AV3
----
S-Video1
----
S-Video2
----
Component1
----
Component2
----
† PC
Input
AV1
English - 45
Enter
√
Enter