Table of Contents
Advertisement
Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a Camcorder to your TV.
You can use your camcorder to view tapes without using a VCR.
1
Locate the A/V output jacks on the
camcorder. They are usually found on
the side or back of the camcorder.
Connect a set of audio cables
2
between the AUDIO IN jacks on the
TV and the AUDIO OUT jacks on the
camcorder. If you have a mono
Camcorder, connect L(mono) to the
Camcorder audio out using only one
audio cable.
Connect a video cable between the
3
VIDEO IN (or S-VIDEO IN) jack on
the TV and the VIDEO OUT jack on
the Camcorder. The audio-video
cables shown here are usually
included with a Camcorder. (If not,
check your local electronics store.) If
your Camcorder is stereo, you need
to connect a set of two cables.
Connecting a DVD Player
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
Connecting to Y,P
B
1
Connect a set of audio cables
between the COMPONENT (1 or 2)
audio (L,R) in jacks on the TV and the
AUDIO OUT jacks on the DVD player.
To enable Component video viewing,
2
connect a set of video cables
between the COMPONENT (1 or 2)
VIDEO (Y, P
, P
) in jacks on the TV
B
R
and VIDEO (Y/P
/P
B
jacks on the DVD player.
Note: For an explanation of
Component video, see your DVD
player's owner's manual.
,P
R
Incoming
Cable or
Antenna
or Y/C
/C
) OUT
R
B
R
1
Camcorder
Output Jacks
TV Rear of right side
or
TV Rear Panel
2
DVD Player
5
Camcorder
3
2
1
Advertisement
Table of Contents
