Connecting A Dtv Set-Top Box; Connecting To Y, P (480P, 1080I) - Samsung HCN436W Owner's Instructions Manual

I
N S TA L L AT I O N

Connecting a DTV Set-Top Box

Connecting to Y, P
Connect the Y, P
on the TV. Next, connect the Left and Right audio from the set-top box to the corre-sponding
L and R terminals on the TV. (The connections for a typical set-top box are shown below.)
1
Connect a set of audio cables between
the DTV Set-Top Box audio in jacks on
the TV and the AUDIO OUT jacks on the
DTV Set-Top box.
2
To enable Component video viewing,
connect video cables between the Y, P
and P
(or Y, C
box.
Note: For an explanation of
Component video, see your
DTV Set-top box' s owner' s instruction.
2.9
C T : I
HAPTER WO NSTALLATION
, P (480p, 1080i)
B R
, and P video outputs of the set-top box to their corresponding inputs
B R
inputs on the TV and Y, P , and P
R B
, C ) outputs on the DTV Set-Top
B R
,
B
R