Table of Contents
Advertisement
BP68-00342A-00Eng_TV
3/30/04
T V O
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (antenna) and
cable channels. After the available channels are memorized, use the CH
to scan through the channels. This eliminates the need to change channels by entering the
channel digits.
Selecting the Video Signal Source
Before your TV can begin memorizing the available channels, you must specify the type of
signal source that is connected to the TV (i.e., an antenna or a cable system).
1
Press the MENU button.
Press the ... or † button to
select "Channel", then press the
ENTER button.
2
Press the ... or † button to
select "Air/CATV", then press the
ENTER button.
Press the ... or † button to
select "Air", "STD", "HRC" or
"IRC", then press the ENTER
button.
Press the EXIT button to exit.
• "STD", "HRC" and "IRC" identify various types of cable TV systems. Contact your local cable company
to identify the type of cable system that exists in your particular area. At this point the signal source
has been selected. Proceed to "Storing Channels in Memory Automatically".
• Subscription cable services require service-specific requirement for viewing.
26
8:51 PM
Page 26
P E R AT I O N
T V
Antenna
Air/CATV
Auto Program
Favorite Channels
Fine Tune
Add/Delete
† More
Move
Enter
T V
Antenna
Air/CATV
Auto Program
Favorite Channels
Fine Tune
Add/Delete
† More
Move
Enter
and CH
Channel
√ √
: Ant.1
√ √
: Air
√ √
√ √
√ √
√ √
Return
œ If you are connected to an
antenna, press the ... or † button
Channel
to select "Air".
√ √
: Ant.1
√ √
: Air
Air
√ √
STD
œ If you connected cable, press
√ √
HRC
√ √
the ... or † button to select the
IRC
√ √
type of cable system: "STD",
"HRC" or "IRC".
Return
buttons
Advertisement
Table of Contents
