BP68-00342A-00Eng_TV
3/30/04
T V O
Setting the Dynamic Range
Reduces the difference between low and high pitched tones to suitable output levels,
recommended for night time use.
3
Press the ... or † button to
select "Dynamic Range", then
press the ENTER button.
Press the ... or † button to
select "On", then press the
ENTER button.
Adjusting Speaker Levels
The Test Tone confirms the speaker connections and aligns the levels of the speaker outputs.
The order of the Test Tone sounds is as follow: Front Left -> Center -> Front Right -> Rear
Right -> Rear Left -> Sub Woofer
4
Press the ... or † button to
select "Level Control", then
press the ENTER button.
Press the ENTER button to select
"Test Tone".
Press the ... or † button to
select "On", then press the
ENTER button.
5
Press the ... or † button to
select the speaker to be
adjusted, then press the ENTER
button.
Press the œ or √ button to
increase or decrease the volume
of selected speaker, then press
the ENTER button.
8:51 PM
Page 49
P E R AT I O N
T V
Dolby Pro Logic II
Dynamic Range
Level Control
Time Delay
Move
Enter
T V
Test Tone
Front Left
Center
Front Right
Rear Right
Rear Left
Sub Woofer
Move
Enter
T V
Test Tone
Front Left
Center
Front Right
Rear Right
Rear Left
Sub Woofer
Move
Adjust
œ This function only works when
Dolby Digital is activated.
Dolby Digital
√ √
: On
√ √
: Off
Off
√ √
On
√ √
Return
œ The Test Tone for the sub
woofer is very low frequency.
Level Control
This is normal, not a malfunction.
√ √
: Off
Off
On
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
Return
Level Control
√ √
: On
0 dB
0 dB
0 dB
0 dB
0 dB
0 dB
Return
49