I hear unwanted noise.
When the volume for a part is raised, the digital signal
processing may overload the signal, which could cause
distortion or other noises. This is not a malfunction.
Try lowering the volume on each part button.
You may hear distorted or noisy sounds due to input
overload with certain effects. This is not a malfunction.
In certain electrical environments, you may hear noise due
to a ground loop or other factors.
The pedal switch or expression/volume pedal
connected to the FOOT CONTROLLER jack doesn't work
like it should.
The functions or polarity for the pedal might not be set
correctly.
See "Pedal Function" (page 22) and "Pedal Polarity"
(page 22) for these settings in the SETTING functions.
Is the variable range of the expression/volume pedal set
correctly?
Calibrate as shown on "Calibrating an expression/volume
pedal" (page 28).
I cannot record a user song.
The maximum number of user songs is 999.
You may need to delete one (see page 20 "Deleting a user
song".)
MIDI signals sent to/from this instrument and a
computer are not being correctly received.
Is the USB cable connected correctly to the USB TO HOST
port?
The instrument does not let me access the MEDIA
functions.
Is your USB flash drive correctly plugged in?
If the USB flash drive is correctly plugged in, you should see
in the display.
29
Appendix