System Requirements; Installation Procedure; Install The Samsung Software - Samsung MSYS 5200 User Manual

System Requirements

Before you start, make sure you have the following minimum computer
setup:
¥ Windows 3.x, or Windows 9x: 486SX 33MHz or higher processor with 8
MB or higher RAM
¥ Windows NT 4.0 (Service Pack 3): Pentium 90 or higher CPU with 32 MB
or higher RAM
¥ Free disk space of at least 50MB for full installation
¥ CD-ROM drive

Installation Procedure

à Make sure the machine is plugged in and connected to your computer. Turn
your computer and the machine on.
à If Windows 95/98 users see the ÒNew Hardware FoundÓ screen, close it by
clicking Cancel .

Install the Samsung Software

1. Insert the supplied CD-ROM into your CD-ROM drive.
The SmarThru program is automatically running and the Samsung
SmarThru Installation screen will appear.
If the Samsung SmarThru Installation screen does not appear:
1) Windows 95/98 users should select Run from the Start menu.
Windows 3.x users should select Run from the File menu.
2) Type D:\Autorun (where ÔDÔ represents the letter designation of your
computerÕs CD ROM drive), and click OK to start the installation
program.
Installing SmarThru Software
1.3