Troubleshooting Ps Errors - Samsung ML-2251NP User Manual

Troubleshooting PS Errors

The following situations are PS language specific and may occur
when several printer languages are being used.
N
errors occur, open the Print Options window and click the desired
selection next to the PostScript errors section.
Problem
PostScript file can
not be printed.
Letters are
fragmented and
illegible.
A PS error page
prints.
The optional Tray2
is not selected in
the driver.
: To receive a printed or screen displayed message when PS
OTE
Possible Cause
The PostScript driver
may not be installed
correctly.
Or a problem has
occurred in the
PostScript DIMM.
The pure binary data
option is selected as
the data format for
your print job.
Print job may not be
PS.
The printer driver has
not been configured to
recognise the optional
Tray2.
Solution
• Reinstall the PS driver, referring to
page B.2.
• Print a configuration page and verify
that the PS version is available for
printing.
• If the problem persists, contact a
service representative.
Set the data format for your print job to
the ASCII option.
Make sure that the print job is a PS job.
Check to see whether the software
application expected a setup or PS
header file to be sent to the printer.
Open the PostScript driver properties
and set the Tray2 item of the Device
option to Installed.
S
OLVING PROBLEMS
6
6.23