Table of Contents
Advertisement
54 MAINTENANCE
After the Self Clean Cycle
• The oven door remains locked until the oven
temperature has cooled.
• You may notice some white ash in the oven. Wipe
it off with a damp cloth or a soap-filled pad after the
oven cools. If the oven is not clean after one self-
clean cycle, repeat the cycle.
• If oven racks were left in the oven and do not slide
smoothly after a self-clean cycle, wipe racks and
rack supports with a small amount of vegetable oil
to make them glide more easily.
• Fine lines may appear in the porcelain because it
went through heating and cooling. This is normal
and will not affect performance.
NOTE
• The Self Clean cycle cannot be started if the
Lockout feature is active.
• Once the Self Clean cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven is cooled. The lock
releases automatically.
• Once the door has been locked, the lock
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock
to activate.
• If the clock is set for a 12-hour display (default)
the Delayed Self Clean can never be set to
start more than 12 hours in advance.
• After the oven is turned off, the convection
fan keeps operating until the oven has cooled
down.
Changing the Oven Light
The oven light is a standard 40-watt appliance bulb. It
turns on when the oven door is open. When the oven
door is closed, touch Light to turn it on or off.
Replacing Lamp on Side Wall
1
Unplug oven or disconnect power.
2
Remove oven racks.
3
Slide a flat blade screwdriver between the
housing and the glass light cover.
4
Support the glass light cover with two fingers to
prevent the cover from falling to the bottom of
the oven.
Glass Light Cover
Flat blade screwdriver
5
Gently twist the screwdriver blade to loosen the
glass light cover.
Housing
6
Remove bulb from socket.
7
Replace bulb, replace light cover by snapping
back into place.
8
Plug in oven or reconnect power.
WARNING
• Make sure that the oven and bulb are cool.
• Disconnect the electrical power to the oven at
the main fuse or circuit breaker panel. Failure
to do so can result in severe personal injury,
death, or electrical shock.
Advertisement
Table of Contents
