Operation Check; Suitability For Use/Contact Information - Omron F3SG-4RA****-25-01TS Series Quick Installation Manual

Setting with DIP Switch

7. Operation Check

After setting with DIP Switch, wiring, mounting and beam alignment are done, check the operation of the
F3SG-RA. Attach the included Troubleshooting Guide Sticker nearby, if necessary.
Refer to Safety Light Curtain F3SG-R Series User's Manual or the website for troubleshooting.
Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the
combination of the Product in the Buyer's application or use of the Product. At Buyer's request, Omron will provide applicable
third party certification documents identifying ratings and limitations of use which apply to the Product. This information by
itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product,
machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the
particular Product with respect to Buyer's application, product or system. Buyer shall take application responsibility in all
cases.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT
ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE
OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL
EQUIPMENT OR SYSTEM.
See also Product catalog for Warranty and Limitation of Liability.
OMRON Corporation
Shiokoji Horikawa, Shimogyo-ku, Kyoto, 600-8530 JAPAN
Regional Headquarters
OMRON EUROPE B.V. (Representative and Importer in EU)
Wegalaan 67-69, NL-2132 JD Hoofddorp
THE NETHERLANDS
Tel: (31)-2356-81-300 / FAX: (31)-2356-81-388
OMRON ELECTRONICS LLC
2895 Greenspoint Parkway, Suite 200
Hoffman Estates, IL 60169 U.S.A.
Tel: (1) 847-843-7900 / Fax: (1) 847-843-7787
In the interest of product improvement, specifications are subject to change without notice.
F3SG-4RA-25-01TS
Quick Installation Manual
Wiring
Suitability for Use
Suitability for Use
Industrial Automation Company (Manufacturer)
Mounting/Beam Alignment
For more information, visit
TROUBLESHOOTING [EN]
Blinking OFF
http://www.ia.omron.com/f3sg-r
LED INDICATOR MAJOR CAUSE
TOP Cap is not attached. Error of other F3SG in cascade.
CFG Error of model combination in cascade
EDM Error of EDM
LOCKOUT
INTERNAL Error of internal circuit
ON/OFF Error of OSSD lines
Blinking Once
COM Error of communication
BTM or LONG Error of DIP-SW setting
POWER Error of emitter
LOCKOUT ON/OFF, COM, or
Error due to abnormal power supply or noise
INTERNAL
Blinking Twice POWER
Error due to noise
LOCKOUT
STB Error due to vibration or ambient light
http://www.ia.omron.com/f3sg-r
/Contact Information
Contact: www.ia.omron.com
OMRON ASIA PACIFIC PTE. LTD.
No. 438A Alexandra Road # 05-05/08 (Lobby 2),
Alexandra Technopark,
Singapore 119967
Tel: (65) 6835-3011 / Fax: (65) 6835-2711
OMRON (CHINA) CO., LTD.
Room 2211, Bank of China Tower,
200 Yin Cheng Zhong Road,
PuDong New Area, Shanghai, 200120, China
Tel: (86) 21-5037-2222 / Fax: (86) 21-5037-2200
Operation check
12