Machine's Basic Settings; Altitude Adjustment; Using The Save Modes; Auto Continue - Samsung CLP-310W User Manual

• If the installation window does not appear, click Start > Run. Type
X:\Setup.exe, replacing "X" with the letter which represents your
drive and click OK.
• If you use Windows Vista, Windows 7 and Windows Server 2008 R2,
click Start > All Programs > Accessories > Run, and type
X:\Setup.exe.
• The installation window may slightly differ, if you are
reinstalling the driver.
• View User's Guide: Allows you to view the User's Guide. If
your computer does not have Adobe Acrobat, click on this
option and it will automatically install Adobe Acrobat Reader
for you.
3. Select Typical installation for a network printer, and then click Next.
4. The list of machines available on the network appears. Select the printer
you want to install from the list and then click Next.
• If you do not see your machine on the list, click Update to
refresh the list, or select Add TCP/IP Port to add your machine
to the network. To add the machine to the network, enter the
port name and the IP address for the machine.
• To verify your machine's IP address or the MAC address, print
a Network Configuration Report page.
5. After the installation is finished, a window appears asking you to print a
test page and to register yourself as a user of Samsung machines in
order to receive information from Samsung. If you wish to do so, select
the corresponding checkbox(es) and click Finish.
If your machine does not work properly after the installation, verify
your network settings and try reinstalling the printer driver.
Congratulations, you have installed your Samsung wireless network printer.
Print another copy of the Configuration report and keep it for future
reference. You are now ready to use your new Samsung wireless printer on
your network.

MACHINE'S BASIC SETTINGS

After installation is complete, you may want to set the machine's default
settings. Refer to the next section if you would like to set or change values.

Altitude adjustment

The print quality is affected by atmospheric pressure, which is determined
by the height of the machine above sea level. The following information will
guide you on how to set your machine to the best print quality or best quality
of print.
Before you set the altitude value, find the altitude where you are using the
machine.
0
30 _Getting started
1. Ensure that you have installed the printer driver with the provided
2. Double-click the Smart Panel icon on the Windows task bar (or
3. Click Printer Setting.
4. Click Setting > Altitude Adjustment. Select the appropriate value from

Using the save modes

Auto continue

This is the option to set the machine to continue printing or not, in case the
paper size you have set and the paper within the tray mismatches.
1. Ensure that you have installed the printer driver with the provided
2. Double-click the Smart Panel icon on the Windows task bar (or
3. Click Printer Setting.
4. Click Setting > Auto Continue. Select the appropriate value from the
1 Normal
2 High 1
3 High 2
4 High 3
Printer Software CD.
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
the dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Altitude. Select the appropriate
altitude value, and then click Apply.
Power Save mode
Power Save mode allows your machine to reduce power consumption
when it is not in actual use. You can turn this mode on and select a
length of time for which the machine waits after a job is printed before it
switches to a reduced power state.
1. Ensure that you have installed the printer driver with the provided
Printer Software CD.
2. Double-click the Smart Panel icon on the Windows task bar (or
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
3. Click Printer Setting.
4. Click Setting > Power Save. Select the appropriate value from the
dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Power Save. Select the appropriate
altitude value, and then click Apply.
Printer Software CD.
Notification Area in Linux).
You can also click Smart Panel on the status bar in Mac OS X.
dropdown list, and then click Apply.
If your machine is connected to a network, SyncThru™ Web
Service screen appears automatically. Click Machine Settings >
Setup (or Machine Setup) > Auto Continue. Select the
appropriate altitude value, and then click Apply.