Polycom SoundPoint IP 650 Quick Reference Manual page 8

ATAT&T Voice DNA® Quick Reference Guide
for the Polycom® SoundPoint® IP 650 and 670 Phones
Page 8
AT&T Voice DNA Feature
Account codes
An account code enables your AT&T Voice
®
DNA service to track call data by account or
category for outbound calls made from your
organization. You may be assigned one of the
following types of account codes:
Mandatory—For all calls except 911, you're
always prompted and must enter an account
code when calling outside your organization.
Optional—You can enter a feature access
code followed by the account code when
calling outside your organization.
Block and unblock Caller ID
When Caller ID is turned on, your number and
name appear on the phones you call. If
permitted by your organization, you can block
your Caller ID for a single call outside your
organization. Or your Administrator can block
your line's Caller ID for all calls.
Note: Your AT&T Voice DNA Administrator
determines the organization's practice for
Caller ID and Caller ID blocking.
© 2013 AT&T Intellectual Property. All rights reserved. AT&T, the AT&T logo and all other AT&T marks contained herein are
trademarks of AT&T Intellectual Property and/or AT&T affiliated companies. All other marks contained herein are the property
of their respective owners.
Procedure
Call using a mandatory account code:
1. Enter the phone number you want to call.
2. When prompted, enter the account code.
Call using an optional account code:
1. Enter *50.
2. When prompted, enter the account code.
3. Enter the phone number you want to call.
Temporarily block Caller ID:
1. Enter *67 and the number you want to call.
2. Press the Dial soft key.
Temporarily unblock Caller ID:
1. Enter *82 and the number you want to call.
2. Press the Dial soft key.