Adjusting The Network Settings - Vizio D24h-G9 User Manual

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and built-in
high-speed Wireless-N. D24h-G9 and D40f-G9 support Wireless-N.
D50x-G9 and V505-G9 support Wireless-AC.
If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu. You
must unplug the Ethernet cable to set a wireless network
connection
Connecting to a Wireless Network
To connect to a wireless network whose
network name (SSID) is being broadcast:
Network
1. Press the Menu button on the
remote. The on-screen menu is
Wired Connection
displayed.
Wireless Access Points
2. Use the Arrow buttons on the
remote to highlight Network and
press OK. The NETWORK menu is
displayed.
3. If you do not see your wireless
network displayed, highlight More Manual Setup
Access Points and press OK. The
Hidden Networks
WIRELESS ACCESS POINTS menu,
Test Connection
which is a list of available wireless
networks, is displayed.
4. Highlight the name of your wireless
network (this is the network's SSID)
and press OK.
5. Using the on-screeen keyboard,
enter your network's password,
then highlight Connect and press
OK.
6. Press the Exit button on the remote.
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual Setup
feature.
To change advanced network settings:
1. From the NETWORK menu, highlight
Manual Setup and press OK. The
MANUAL SETUP menu is displayed.
2. To change the settings manually, use
the Arrow buttons on the remote
to highlight DHCP and then use the
Left/Right Arrow buttons to change
the setting to Off.
3. Use the Arrow and OK buttons to
adjust each setting:
Back
• IP Address - The IP address assigned
Disconnected
to the TV.
• Subnet Mask - The subnet Exit 2D
• Default Gateway - Your network's
default gateway address.
• Pref. DNS Server - Your preferred
domain name server address.
• Alt. DNS Server - Your alternate
domain name server address.
4. Use the Arrow buttons on the remote to highlight Save and press OK.
5. Press the Exit button on the remote.
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the TV's
MAC address in the router's settings. To find the TV's MAC address:
1. From the NETWORK menu, highlight Manual Setup and press OK.
The MANUAL SETUP menu is displayed.
Manual Setup
Back
2. Find the MAC address for the TV at the bottom of the list. The MAC
addresses for the connections in use are displayed:
DHCP Off
• RJ45 MAC - The Ethernet or RJ45 MAC address may be needed
IP Adress __. __.__.__
to set up your network when you have connected the TV to your
Subnet Mask __. __.__.__
network when you have connected the TV to your network with an
Defult Gateway __. __.__.__
Ethernet (Cat 5) cable.
Pref. DNS Server __. __.__.__
• Wireless MAC - The Wireless (WiFi) MAC address may be needed
Alt DNS Server __. __.__.__
to connect your TV to your network with WiFi.
RJ45 Mac 0:0:0:0:0:0
Wireless Mac 0:0:0:0:0:0
Save
Cancel
3
25