Using The Tv Buttons On The Remote Control - Samsung DVD-V2500 Instruction Manual

Using the TV Buttons on the Remote Control

1
3
3
2
4
4
5
12
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes
SAMSUNG 01, 14, 15, 23
SHARP 02, 16, 22
SONY 03
RCA 07, 29
TOSHIBA 09
PANASONIC 12, 24
JVC 11
HITACHI 10
MITSUBISHI 13
NEWSAN 27
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogram the code, following the same procedure.
You can then control the television using the following buttons.
Button Function
POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
+ –
VOL or Used to adjust the volume of the television.
CH ( or ) Used to select the required channel.
MUTE Used to toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.
Brand Codes
LOEWE 28
ZENITH 17
LG 06, 08, 18
MAGNAVOX 04
EMERSON 21
SANYO 05, 20
DAEWOO 19
NOBLEX 25
TELEFUNKEN 26