Using The Tv Buttons On The Remote Control; Technical Specifications - Samsung DVD-V1000 Instruction Manual

01547A DVD-V1000/XAA-Eng5 5/16/02 3:47 PM

Using the TV Buttons on the Remote Control

GB
Your VCR remote control will work with Samsung televisions and
compatible brands.
To determine whether your television is compatible, follow the instructions
below.
POWER OPEN/CLOSE
1
TRK- AUTO TRK+
2 3
ZOOM DISPLAY
SHUTTLE
MUTE
4 5 6
CLOCK/
MODE COUNTER
REPEAT
7 8 9
3
+
TV VIEW ANGLE
VOL CH
INPUT - PREV.CH
2
3
REC DISC MENU
SELECT
DVD VCR TV
4
+
TV VIEW ANGLE
VOL CH
INPUT - PREV.CH
4
REC DISC MENU
TRK- AUTO TRK+
2 3
ZOOM DISPLAY
You can then control the television using the following buttons.
SHUTTLE
MUTE
4 5 6
CLOCK/
MODE COUNTER
5
Button
REPEAT
7 8 9
SKIP CLEAR
POWER
3D SOUND A.DUB TV/VCR
F.ADV
100+ 0
INPUT
SELECT
DVD VCR TV
VOL
CH (" or ❷)
MUTE
72
Page 72
1
Switch your television on.
2
Point the remote control towards the television.
3
Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing the
appropriate numeric buttons.
Brand Codes Brand Codes
SAMSUNG 01, 14, 15, 23 LOEWE 28
SHARP 02, 16, 22 ZENITH 17
SONY 03 LG 06, 08, 18
RCA 07, 29 MAGNAVOX 04
TOSHIBA 09 EMERSON 21
PANASONIC 12 SANYO 05, 20
JVC 11 DAEWOO 19
HITACHI 10 NOBLEX 25
MITSUBISHI 13 TELEFUNKEN 26
NEWSAN 27
Result: If your television is compatible with the remote control, it
will switch off. It is now programmed to operate with the
remote control.
If several codes are indicated for your television brand, try
each one in turn until you find one that works.
When you change the batteries in the remote control, you
must reprogram the code, following the same procedure.
Function
Used to switch the television on and off.
Used to select an external source.
+ –
or Used to adjust the volume of the television.
Used to select the required channel.
Used to toggle the sound on and off.
The various functions will not necessarily work on all
televisions. If you encounter problems, operate the
television directly.

Technical Specifications

AUDIO 2 Stereo audio inputs, RCA Connector, -8dbm, 47K ,
front and rear
Inputs VIDEO 2 Composite video inputs, RCA Connector, 75 , 1Vp-p
RF Antenna or CATV Input, F-Connector, 75
AUDIO 2 Stereo audio outputs, RCA Connector, -8dbm, 1.5K
AUDIO (DVD only) 2 Digital audio outputs, 1 optical, 1 coaxial
VIDEO 1 Composite video output, RCA Connector, 75 , 1Vp-p
Outputs VIDEO (DVD only) 1 S-Video output, S-Connector, 75 , Y=1.0Vp-p,
C=0.286Vp-p
1 Component video output, 75 , Y=1.0Vp-p, Pb=0.7Vp-p,
Pr=0.7Vp-p
RF Channel 3 or 4
VIDEO SYSTEM 1/2-inch VHS system, 4 rotary head helical scanning;
FM azimuth luminance;chrominance: converted sub system
phase shift
AUDIO TRACK Normal: 1 track; Hi-Fi: 2 track
PLAY/RECORD TIME T-180 tape: SP 3 hours, SLP 9 hours
VCR FF/REW TIME T-120 tape: <2 minutes
HEADS Video: DA 4 rotary Duraheads™
Audio: 2 rotary heads (Hi-Fi); 1 stationary head (Linear)
Control:1 stationary head
Erase: 1 full track, 1 audio track
WOW & FLUTTER Less than 0.005% (Hi-Fi)
FREQ. RESPONSE 20-20,000 Hz (Hi-Fi)
DISC COMPATIBILITY CD, CD-R, Not compatible with CD-R/W
DVD-Video, CD-Digital Audio (5" and 3.5"), CD-Video, MP3
files on CD-ROM
DVD FREQ. RESPONSE 96/48 kHz Sampling: 4 Hz-22kHz
S/N RATIO 110 dB
DYNAMIC RANGE 96 dB
THD 0.003 %
POWER REQUIREMENT 120V AC, 60 Hz, 27 watts
CLOCK BACKUP TIME 6 hours
SYSTEM
ENVIRONMENT 41-104 F (5-40 C); 10%-75% humidity
WEIGHT 21.5 lbs.
GB
73