Search/Index Features; The Clock/Counter Button; Placing Index Marks; Index Scan - Samsung DVD-V1000 Instruction Manual

01547A DVD-V1000/XAA-Eng5 5/16/02 3:47 PM

The Clock/Counter Button

GB
The DVD-VCR Search/Index features allow you to scan and search
for Index Marks, quickly find blank tape, search for tape counter
2 3
positions, and return to 0:00:00. The real-time tape counter gives
ZOOM DISPLAY
SHUTTLE
you real-time feedback on the precise position of your DVDs and
MUTE
5
4 6
CLOCK/
MODE COUNTER videotapes.
REPEAT
7 8 9
Press the CLOCK/COUNTER button repeatedly to cycle the front
SKIP CLEAR
3D SOUND A.DUB TV/VCR
panel display through the following three views:
F.ADV
100+ 0
SELECT
DVD VCR TV
62
Page 62
1 Clock
Shows you the current time as set in the Set Clock menu.
2 Real-Time Counter
Shows you the current counter position in the DVD or VCR deck in
hours, minutes, and seconds.
3 Time Remaining (VHS only)
Shows you the amount of time left on the tape in the VCR deck,
computed by subtracting the current tape position from the total
tape length in hours and minutes.
NOTE: The Clock/Counter/Time Remaining display will not appear
if there is a deck status message on the front panel display.

Placing Index Marks

Index Marks are like bookmarks on your videotapes. They are
inserted automatically at the start of every recording, or you can
place them manually anywhere on a tape. Later you can locate
these "bookmarks" using Index Search or Index Scan.
1 Automatic Index Marks
Index Marks are placed automatically whenever you start
recording, including OTR (One Touch Recording), Timer
Recording.
2 Manual Index Marks
You can place an Index Mark manually any time a recording is in
progress by pressing the Mark button on the remote control.
"Index" will flash briefly on the On-Screen Display while the mark is
recorded.

Index Scan

Index Scan will fast-forward or rewind to the nearest Index Mark,
play a few seconds of tape, and then fast-forward or rewind to the
next Index Mark. When you find the show you want to watch, press
Play.
Tip: Use this feature with the Date/Time Stamp to quickly find
Timer Recordings on your tapes. For example, when Index Scan
stops at an Index Mark and plays a few seconds of tape, you will
see the date & time the show was recorded.
1 Open "SEARCH MENU"
From Stop or Play mode, press the SEARCH button.
2 Select "Index Search/Scan"
Using the up/down, move the selection arrow to "Index
Search/Scan," then push right to select.
3 Scan for Index Marks
Press Fast-Forward or Rewind to begin scanning for Index Marks
forwards or backwards.
4 Review the Tape
When Index Scan locates an Index Mark, it will play the tape for 5
seconds. If it is the scene you want to watch, press the Play/Pause
button. If it is not, the VCR will automatically search for the next
Index Mark.
GB
REC DISC MENU
1
SETUP
/ENTER
2
TITLE SUBTITLE AUDIO MARK
SP/SLP SET TIMER RETURN SEARCH/INDEX
63