One-Touch Recording (Otr); Record Speed; Record Source - Samsung DVD-V1000 Instruction Manual

01547A DVD-V1000/XAA-Eng4 5/16/02 3:41 PM

One-Touch Recording (OTR)

GB
One-Touch Recording (OTR) allows you to add recording time in
30-minute increments up to 9:30 minutes at the touch of a button.
OTR 0:30
0:11:40
SP
OTR 0:30
OTR 0:30
OTR 1:00
0:11:40
OTR 1:30
SP
OTR 2:00
OTR 9:00
OTR 9:30
OTR Loop
0:11:40
SP
0:11:40
SP
54
Page 54
1 Start Recording
Follow the instructions on page 52 to begin recording.
2 Activate OTR
While in Record mode, press the REC button again to activate
One-Touch Recording (OTR).
• OTR 0:30 appears on the On-Screen Display and the DVD-VCR
will record for exactly 30 minutes.
3 Add Recording Time
Continue pressing REC to add recording time in 30 minute
increments up to 9 hours and 30 minutes.
4 Activate Loop Record
When you reach OTR 9:30, press REC again to enter Loop
Record mode. The DVD-VCR will record the entire videotape over
and over in a continuous loop until you press STOP. This can be
used for continuous recording of security cameras.
• If you press Power during OTR, the DVD-VCR will turn off
automatically when the recording time has elapsed.
• The DVD-VCR stops recording automatically when the time has
elapsed.

Record Speed

You can slow down the recording speed from SP to SLP in order to
fit six hours of programming on a T-120 tape.
1 Start Recording
Follow the Basic Recording instructions on page 52.
2 Set Record Speed
Press the SP/SLP button on the remote control to set the Record
Speed to one of the following options:
• SP – Standard Play, for best quality.
• SLP – Super Long Play, for maximum recording time (3 times
SP).
NOTE: The selected Record Speed will appear on the front panel
display.
Maximum Recording Time - SP vs. SLP
Tape Length SP (Standard Play) SLP (Super Long Play)
T-120 2 hrs 6 hrs
T-160 2hrs 40 mins 8 hrs
T-180 3 hrs 9 hrs

Record Source

You can set the DVD-VCR to record from a variety of sources,
including the Tuner, DVD deck, Line 1 (front) input, or Line 2
(rear) input. The Auto setting will record whatever is currently
visible on-screen, as set by the TV VIEW button.
1 Open the "SETUP MENU"
Press the SETUP button on the remote control. The "Setup Menu"
appears.
2 Select "VCR & Channel Setup"
Using the up/down, move the selection arrow to "VCR & Channel
Setup," then push right to select.
3 Set "Record Source"
Move the selection arrow to "Record Source," then push right to
select from the following options. The VCR will record from:
• Auto – Whatever is currently visible on screen.
• Tuner – The VCR's built-in television tuner.
• Line 1 – An external source, such as a camcorder, connected to
the front line inputs.
• Line 2 – An external source, such as a Satellite receiver,
connected to the rear line inputs.
• DVD – A DVD playing in the DVD deck.
GB
SETUP
/ENTER
2
TITLE SUBTITLE AUDIO MARK
SP/SLP SET TIMER RETURN SEARCH/INDEX
REC DISC MENU
1
SETUP
/ENTER
TITLE SUBTITLE AUDIO MARK
SP/SLP SET TIMER RETURN SEARCH/INDEX
55