Contents Contents The Presence Grey Bluetooth headset ..........................2 Package contents ................................. 2 Product overview .................................. 3 overview of the Presence Grey headset ..........................3 overview of the BtD 800 UsB dongle ..........................3 overview of the LeDs ................................4 Putting the headset into operation ............................ 5 Charging the headset battery ..............................5...
For safety instructions, consult the safety Guide. A list of accessories can be found on the product page at www.sennheiser.com/headsets. For information on suppliers, contact your local sennheiser partner: www.sennheiser.com/headsets > “Find a dealer”. Presence Grey...
PRoDUCt oVeRVIeW Product overview Overview of the Presence Grey headset Volume – button* Microphones on/off power slide Volume + button* Multi-function button UsB socket speaker ear hook * you can swap the +/– assignment of the Volume buttons (see page 13) If, for example, you want to wear the headset on the left ear instead of the right (see page 9).
0.2s 0.2s 0.2s 0.2s 0.2s 0.2s • outgoing/active call 0.2s 0.2s 0.2s 0.2s • Music streaming in standard quality Incoming call 0.2s 0.2s Music streaming in high quality Microphone of the connected Bluetooth device is muted Presence Grey Bluetooth headset...
When the battery charge level drops below 15 minutes of talk time, the LeD flashes red and the voice prompt “recharge headset” is announced several times. When the battery is flat, the headset switches off automatically. Presence Grey Bluetooth headset...
Bluetooth or an additional Bluetooth UsB dongle (wireless audio transmitter and receiver). the BtD 800 UsB Bluetooth UsB dongle is supplied together with the Presence Grey UC variants. Presence Grey Bluetooth headset...
Page 8
0000 Sennheiser Presence Laptop Nick < 20 cm select “Presence” to establish a Bluetooth connection once the headset is paired with the mobile phone, the to the headset. If necessary, enter the default PIn code LeD goes off. “0000”.
Page 9
Press and hold the dongle’s button for 3 seconds to your computer. enter pairing mode. the LeD alternately flashes blue and red. ”Pairing successful” once the Bluetooth devices are paired, the LeD flashes 3 times blue and then lights up in a constant dim blue. Presence Grey Bluetooth headset...
(premounted) or the ear adapter with loop from the headset. headset. Move the headset to your ear and insert the loop of the Adjust the angle of the loop so that the headset fits ear adapter. comfortably and securely in your ear. Presence Grey Bluetooth headset...
Page 11
Position the headset so that it fits comfortably. behind your ear. If the headset does not fit optimally, slightly bend the ear hook a bit. Wearing the headset with the optional headband the Presence headband is available as an accessory. Presence Grey Bluetooth headset...
• “Phone one connected” for the first mobile phone • “Phone two connected” for the second mobile phone • “Dongle connected” for the sennheiser Bluetooth dongle. ”... connected“ only two out of the maximum eight paired Bluetooth devices can be simultaneously connected to the headset.
“Between one and two hours talk time” 1 to 2 hours “Less than one hour talk time” less than 1 hour less than 15 minutes talk time; automatic voice prompt „Recharge headset“ Recharge headset (see page 5). Presence Grey Bluetooth headset...
– Volume – button to reduce the volume. When the minimum or maximum volume is reached, the voice prompt “Volume min” or “Volume max” is announced in the headset. When the voice prompts are disabled, you hear a beep in the headset instead. Presence Grey Bluetooth headset...
• “Phone two disconnected” for the second mobile If you spend more than 5 minutes outside the Bluetooth phone or transmission range, the connection breaks down completely and you have to manually re-establish the • “Dongle disconnected” for the Bluetooth dongle. connection. Presence Grey Bluetooth headset...
When the voice prompts are disabled, you hear a beep in the headset. Press the multi-function button: Accepts a call Rejects a call ”Call rejected” Puts an active call – on hold (pause) ends a call ”Call ended” Presence Grey Bluetooth headset...
Press the multi-function button: Activates voice dialing or voice assistant Cancels voice dialing or voice assistant say your voice command, e.g. “Call Jane”. the Bluetooth device dials Jane’s number. some voice dial systems require an Internet connection. Presence Grey Bluetooth headset...
Rejects the incoming call and continues the active call If you put an active call on hold (toggling): Press the multi-function button: Active call 2nd call put on hold Function ends the active call and makes the call on hold active (phone dependent) Presence Grey Bluetooth headset...
Storing the headset If you do not use the headset for extended periods of time: Charge the built-in rechargeable battery every 3 months for about 1 hour. store the headset in a clean and dry environment. Presence Grey Bluetooth headset...
Updating the firmware of the headset to update the firmware, only one product may be connected at a time: Disconnect all other sennheiser products before starting the update. Headsetup Pro Use a UsB cable with mini UsB plug to connect the start headsetup™...
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions, please contact your local sennheiser partner for assistance. to find a sennheiser partner in your country, search at www.sennheiser.com.
20% to 85% storage: 10% to 95% Trademarks the Bluetooth® word mark and logos are registered trademarks owned by Bluetooth sIG, Inc. and any use of such marks by sennheiser Communications A/s is under license. Presence Grey Bluetooth headset...