Ink Bottle Handling Precautions - Epson ET-M1100 Series User Manual

User's Guide
Note:
For users in Europe, visit the following website for information on Epson's ink bottle yields.
http://www.epson.eu/pageyield
For Australia and New Zealand
BK: Black
532
For Asian countries except for China
BK: Black
1 2
005* /005S *
1 2
* High capacity / * Standard capacity
Related Information
"Technical Support Web Site" on page 91
&

Ink Bottle Handling Precautions

Storing precautions for ink
❏ Store ink bottles at normal room temperature and keep them away from direct sunlight.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ When storing or transporting an ink bottle, do not tilt the bottle and do not subject it to impacts or temperature
changes. Otherwise, ink may leak even if the cap on the ink bottle is tightened securely. Be sure to keep the ink
bottle upright when tightening the cap, and take precautions to prevent ink from leaking when transporting the
bottle, for example, putting the bottle in a bag.
❏ After bringing an ink bottle inside from a cold storage site, allow it to warm up at room temperature for at least
three hours before using it.
❏ Do not open the ink bottle package until you are ready to fill the ink tank. The ink bottle is vacuum packed to
maintain its reliability. If you leave an ink bottle unpacked for a long time before using it, normal printing may
not be possible.
❏ Once you open an ink bottle, we recommend using it as soon as possible.
❏ Epson recommends using the ink bottle before the date printed on the package.
❏ For optimum print results do not maintain low ink levels for extended periods of time.
Handling precautions for refilling ink
❏ Use ink bottles with the correct part code for this printer.
❏ This printer requires careful handling of ink. Ink may splatter when the ink tank is filled or refilled with ink. If
ink gets on your clothes or belongings, it may not come off.
❏ If the ink tank is not filled up to the lower line, refill the ink soon. Continued use of the printer when the ink
level is below the lower line on the tank could damage the printer.
Refilling Ink
46