3.. Once.completing.iShow (wireless projector) app.
may.directly.jump.to.step.6.start.connecting.your.device.and.KODAK.
iShow.1000.Pico.Projector.to.project.
If.you.still.need.sync.documents.into.Android.device.before.projecting,.
please.follow.step.4.instructions.
4.. To.sync.documents.into.Android.device..You.may.use.cable.connection.
to sync and save files into Android device's disk anywhere to enable
iShow (wireless projector) app.
If you prefer wirelessly transfer files into Android device, remember to
download and save the files into Android device first to enable iShow
(wireless projector) app.
5. Once files are completely saved in Android device, you are ready to
proceed.step.6.
6.. To.connect.Android.device.and.KODAK.iShow.1000.Pico.Projector..First,.
entering.the.setting.menu.and.activate.wireless.function.in.Android.device...
Second,.power.on.your.KODAK.iShow.1000.Pico.Projector.by.pressing.
the.power.button.
7.. When.the.pico.projector.starts,.your.Android.device's.wireless.network.
will.automatically.detect.the.signal."iShow-P02xxxxxxx".(signal.name.is.
the.same.as.the.SSID.name,.which.can.be.set.by.the.user)..Select.this.
signal.and.your.Android.device.will.be.connected.to.the.projector.
8.. Click.on.the.installed.iShow (wireless projector) app.
Android device and the file selection pane will show up as below image.
1
locate files in the device.
.for.3.seconds.
locate files in the device.
.installation,.you.
.on.your.