2. To add a service, click Add. The following page appears.
3. Modify the settings as desired, using the information in the topics listed below:
PPP over Ethernet WAN Service
l
IP over Ethernet WAN Service
l
Bridging
l
4. To edit an interface:
a. Click the
Edit
b. Modify the settings as needed and then click through to click Apply/Save.
5. To remove an interface, click the
PPP over Ethernet WAN Service
SMARTRG INC. PROPRIETARY AND CONFIDENTIAL. ALL RIGHTS RESERVED. COPYRIGHT © 2018
button at the far right.
Remove
checkbox next to it and then click the
Remove
button.
28