Table of Contents
Advertisement
Before Using Your Home Theater
To Operate your Samsung TV and the Home Theater with the HT-X40's Remote Control
The DVD Home Theater's remote can be used to control Samsung TVs.
1
Plug the main unit's power cord into the AC power supply.
2
Press the TV button to set the remote to TV mode.
3
Press the POWER button to turn on your Samsung TV
with this remote.
4
Press the TV/VIDEO button to select VIDEO mode on your TV.
VIDEO
5
Press the DVD RECEIVER button to switch to DVD RECEIVER mode to
operate the DVD Home Theater
6
Press the FUNCTION button on the main unit or DVD button
on the remote to enable DVD/CD playback.
22
Disc Playback
DVD
CD
1
Press the OPEN/CLOSE button to open the disc tray.
2
Load a disc.
Place a disc gently into the tray with the disc's label facing up.
3
Close the compartment by pressing the OPEN/CLOSE button again.
Playback starts automatically.
To stop playback, press the STOP button during playback.
If pressed once, <PRESS PLAY> is displayed and the stop position will be stored in memory.
If the PLAY/PAUSE (
) button or ENTER button is pressed, playback resumes from the stop position.
(This function works only with DVDs.)
If pressed twice, <STOP> is displayed, and if the PLAY/PAUSE (
beginning.
To temporarily pause playback, press the PLAY/PAUSE
To resume playback, press the PLAY/PAUSE (
) button again.
• Avoid getting fingerprints on the writing surface of a disc. It may cause the disc to not read properly.
• Depending on the content of the disc, the initial screen may appear different.
• Any piracy could not be runnable in the player. Otherwise, it violates the CSS (Content Scrambling System : a copy protection
system) recommendations.
) button is pressed, playback starts from the
button during playback.
(
)
ENG
23
Hide quick links:
Advertisement
Table of Contents
