Audio Settings - Kenwood KDC-BT268U Instruction Manual

AUDIO SETTINGS

While listening to any source...
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table),
then press the knob.
3 2
Repeat step until the desired item is selected or activated.
4
Press and hold to exit.
(or using the remote control)
1
Press AUD to enter [AUDIO CONTROL].
2 Press J / K to select an item, then press
To return to the previous setting item, press
AUDIO CONTROL
SUB-W LEVEL LEVEL –50 to LEVEL +10 (LEVEL 0): Adjusts the subwoofer output level.
MANUAL EQ The sound elements (frequency level, tone level, Q factor) are preset into
each selection (BAND1 LEVEL to BAND13 LEVEL).
BAND1 LEVEL
LEVEL LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize for
each source. (Before making an adjustment, select the source you want
to adjust.)
BASS EXTEND ON: Turns on the extended bass. ; OFF: Cancels.
BAND2 LEVEL to LEVEL–9 to LEVEL +9 (LEVEL 0): Adjusts the level to memorize for
BAND13 LEVEL each source. (Before making an adjustment, select the source you want
to adjust.)
Q FACTOR 1.35/1.50/2.00: Adjust the quality factor.
PRESET EQ NATURAL/ROCK/POPS/EASY/TOP40/JAZZ/POWERFUL/USER: Selects
a preset equalizer suitable to the music genre. (Select [USER] to use the
settings made in [MANUAL EQ].)
BASS BOOST
LOUDNESS
SUBWOOFER SET
FADER
BALANCE
.
VOLUME OFFSET
.
Default: XX SOUND EFFECT
SOUND RECNSTR
(Sound
reconstruction)
SPACE ENHANCE
SND REALIZER
STAGE EQ
DRIVE EQ
LV1/LV2/LV3/LV4/LV5: Selects your preferred bass boost level. ;
OFF: Cancels.
LV1/LV2: Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level. ; OFF: Cancels.
ON: Turns on the subwoofer output. ; OFF: Cancels.
R15 to F15 (0): Adjusts the rear and front speaker output balance.
L15 to R15 (0): Adjusts the left and right speaker output balance.
–15 to +6 (0): Preset the initial volume level of each source. (Before
adjustment, select the source you want to adjust.)
(Not applicable for TUNER source and AUX source.)
ON: Creates realistic sound by compensating the high-frequency
components and restoring the rise-time of the waveform that are lost
in audio data compression. ; OFF: Cancels.
(Not applicable for TUNER source.)
SML/MED/LRG: Virtually enhances the sound space. ; OFF: Cancels.
LV1/LV2/LV3: Virtually makes the sound more realistic. ;
OFF: Cancels.
LOW/MID/HI: Virtually adjust the sound position heard from the
speakers. ; OFF: Cancels.
ON: Boosts the frequency to reduce the noise heard from outside the
car or running noise of the tyres. ; OFF: Cancels.
ENGLISH 19