Connecting Your System To The Power Supply; Before Using The Dvd Player - Samsung HT-DL105 Instruction Manual

Connecting your System to the Power Supply

The main lead must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
B
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
R-REAR-L WOOFER CENTER
6 3 6
SPEAKERS
Listening on headphones
Use headphones for private listening pleasure (not supplied).
Connect the headphones to the HEADPHONES jack of the front panel.
• No sound is produced from the speakers.
• To prevent hearing damage, do not raise the volume level excessively when using headphones.
Standby
V I D E O
Function
Phones
HEADPHONE jack
13
AV OUT VIDEO VIDEO S-VIDEO S-VIDEO ANTENN ANTENNA A
Y/C
AM
R-FRONT-L COMP.
AUX IN AUX IN
VIDEO OUT VIDEO OUT
L
R
6
SPEAKERS
Volume
Open/Close

Before Using the DVD Player

Your DVD player is capable of playing DVD, VCD, and CD discs.
User instructions may vary depending on the type of disc. Read the instructions
carefully before use.
1
Turn on the power Select a video mode by
to your DVD player pressing the TV/VIDEO
Prepe-
and TV. button.
rations
before
TV
use
•
The "WAIT" message that appears on the display for about seven to eight seconds when
turning on the power or selecting a DVD function indicates a stabilization period for
optimizing the condition of your DVD player. While the message is being displayed, other
buttons remain inactive.
•
When the power is not turned on, press down the Stop (
over 5 seconds.
The product will be initialized to its optimum state.
•
Certain operational features such as the Speaker mode, Test tone, Volume, etc.
will not be displayed on the TV screen.
•
If your TV model is not SAMSUNG, refer to "Remote Control Unit Setup" on page 30.
TV System Selection
Press the TV System button while in stop mode.
•
Each time the TV System button is pressed, "NTSC, PAL" are
selected in this order.
Different countries use different types of TV broadcast systems, video,
audio and channel systems.
Example : The player cannot playback PAL-encoded DVD with NTSC-TV.
2 3
Press the DVD button
to select the DVD input
function.
TV/VIDEO
DVD
) button on the main unit for
TV System
Zoom
GB
14