Controlling A Tv With The Remote; Connecting Your System To The Power Supply; P.scan (Progressive Scan) Function - Samsung 2.0041112184519e16 Instruction Manual

Controlling a TV with the Remote

You can operate your TV by adjusting the DVD remote signal .
1
Turn on the TV.
2
Point the DVD's remote at the TV.
TV
3
While holding the button down, enter the
code for your brand.
•
If there is more than one code listed in the table,
enter one at a time to determine which code works.
example : For SAMSUNG 1TVs TV
While holding down the button,
enter .
4
If the TV turns off, setup is complete.

Connecting your System to the Power Supply

The AC Cord must be plugged into an appropriate socket.
Before plugging your system into an AC outlet, you must check the voltage.
1. Plug the AC Cord on the rear of the system into an appropriate outlet.
2. Press the On/Standby button to switch your DVD Player system on.
15
Code Brand Code Brand
01 SAMSUNG 1 16 SHARP 1
02 SHARP 2 17 ZENITH
03 SONY 18 LG 3
04 MAGNAVOX 19 DAEWOO 8
05 SANYO 1 20 SANYO 2
06 LG 2 21 EMERSON
07 RCA 22 SHARP 3
08 LG 1 23 SAMSUNG 4
09 TOSHIBA 24 MATSUSHITA
10 HITACHI 25 NOBLEX
11 JVC 26 TELEFUNKEN
12 PANASONIC 1 27 NEWSAN
13 MITSUBISHI 2 28 LOEWE
14 SAMSUNG 2 29 RCA2
15
•
The remote may not be able to
control every model TV of the
brands listed.
P.SCAN
(Progressive Scan)
Unlike a regular Interlace Scan in which two fields of picture information are alternated to
create the entire picture (odd scan lines, then even scan lines), Progressive Scan uses
one field of information (all lines displayed in one pass) to create a clear and detailed
picture without visible scan lines. To enjoy a progressive scan video, connect a TV or
monitor that supports a progressive scan input to this device.
While the player is in the Stop mode, hold the P.SCAN
button down for longer than 1 second.
•
The selection switches back and forth between "P.SCAN" and "I.SCAN"
each time the button is held down for a minimum of 1 second.
•
The previous mode is indicated in the display first, followed by the
selected mode in about a second.
P.Scan Adj (Progressive Scan Adjusting)
This function allows you to optimize the picture quality when it becomes poor due to screen distortion or
discs containing erroneous data.
Press the Setup/P . Adj button. (Play mode only)
Each time the Setup/P . Adj button is pressed, the following appears on the TV screen:
•
What is Progressive (or Non-Interlaced) Scanning?
Interlaced Scan (1 FRAME = 2 FIELDS)
In interlaced-scan video, a frame consists of two The progressive scanning method scans one full frame of
interlaced fields (odd and even), where each field video consecutively down the screen, line by line.
contains every other horizontal line in the frame. As opposed to the interlaced scanning process by which a
The odd field of alternating lines is displayed first, and video image is drawn in a series of passes, you get an
then the even field is displayed to fill in the alternating entire image drawn at one time.
gaps left by the odd field to form a single frame. The progressive scanning method is desirable for dealing
One frame, displayed every 1/30th of a second, contains with moving objects. A camera that has the ability to
two interfaced fields, thus a total of 60 fields are capture moving objects is called a "full frame shutter
displayed every 1/60th of a second each. camera".
The interlaced scanning method is intended for capturing
a still object.
•
This function works only on TVs equipped with component video inputs (Y, Pr, Pb) that
support Progressive Video. (It does not work on TVs with conventional component inputs,
i.e., non-progressive scan TVs.)
•
Depending on the brand and model of your TV, this function may not work.
Function
Progressive Scan (FULL FRAME)
16